ACME PAGEANT 300ZR User Manual page 11

Backlight Intensity
To select Backlight Intensity, press the ENTER button to show the BACKLIGHT INTENSITY on
the display. Use the UP/DOWN button to adjust the intensity from 1 (dark) to 10 (bright). Once
selected, press the ENTER button to setup and store. Press the MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
Temperature Unit
To Select Temperature Unit, press the ENTER button to show the TEMPERATURE UNIT on the
display. Use the UP/DOWN button to select ℃ or ℉, press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Display Warning
To select Display Warning, press the ENTER button to show the DISPLAY WARNING on the
display. Use the UP/DOWN button to select No (Normal) or Yes (display will show the error
warning when the unit went wrong), press the ENTER button to store. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Language
To select Language, press the ENTER button to show the LANGUAGE on the display. Use the
UP/DOWN button to select English or Chinese, press the ENTER button to store. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Fixture Test
Enter MENU mode, select Fixture Test, press the ENTER button to confirm, use the UP/DOWN
button to select Auto Test or Manual Test
Auto Test
To select Auto Test, press the ENTER button to show the AUTO TEST on the display. Press the
ENTER button, the unit will run built-in programs to automatically test pan, tilt and zoom. Press
the MENU button back to the last menu or exit menu mode after auto test.
Manual Test
To select Manual Test, press the ENTER button to show the MANUAL TEST on the display.
10B