Commissioning - Endress+Hauser levelflex M FMP 40 Manual

1 Notes on use
⇒
10
1.6

Commissioning

1.6.1 Switching on the measuring device
When the instrument is switched on for the first time, the following messages appear on
the display:
⇓
⇓
⇓
⇓
⇓
⇓
After 5 s, the following message appears
Nach 5 s erscheint (z.B. bei HART Geräten)
After 5 s or after you have pressed
following message appears
Select the language
(this message appears the first time the
instrument is switched on)
Select the basic unit
(this message appears the first time the
instrument is switched on)
⇒
The current measured value is displayed
F
After is pressed, you reach the group
selection.
This selection enables you to perform the basic
setup
Levelflex M
F
the
Endress+Hauser