Function "Ackn. Alarm" (017); Function "Overspill Prot." (018); Function "Broken Probe Det" (019) - Endress+Hauser levelflex M FMP 40 Manual

Hide thumbs Also See for levelflex M FMP 40:

Table of Contents

4 Function group "safety settings" (01)

⇒

4.8

Function "ackn. alarm" (017)

This function acknowledges an alarm in case of "self holding".

Selection:

• no

• yes

The alarm is not acknowledged.

yes

Acknowledgement takes place.

4.9

When "german WHG" is selected, various parameters relating to WHG overflow protec-

tion are defaulted and the instrument is locked against further operation. Select "Stand-

ard" to unlock, the WHG parameter settings are retained.

This function activates the automatic recognition of broken probes.

Selection:

• off

• on

⇓

After 3 s, the following message appears

Endress+Hauser

Levelflex M

Table of Contents

Do you have a question about the levelflex M FMP 40 and is the answer not in the manual?

Levelflex m fmp 41 c Levelflex m fmp 45