Function Group "Output; Profibus Param; Profibus-Pa Only; Function "Commun. Address" (060), Hart Only - Endress+Hauser levelflex M FMP 40 Manual

Levelflex M
⇒
⇒
⇒
"
⇒
"
Endress+Hauser
8 Function group "output" (06), - "profibus param." (06), PROFIBUS-PA only
8

Function group "output" (06),

- "profibus param." (06), PROFIBUS-PA only
8.1

Function "commun. address" (060), HART only

Enter the communication address for the instrument with this function.
• Standard: 0
• Multidrop: 1-15
In multidrop mode, the standard output current is 4 mA. This can be changed in the
"fixed cur. value" (064) function.
Caution!
This function is available for HART devices only!
8.2 Function "instrument addr." (060),

PROFIBUS-PA only

The PA bus address is displayed in this field. The address is set either directly on the
instrument using DIP switches (see instrument operating instructions) or using a special
SetSlaveAddress command via the bus, e.g. by the ToF Tool.
Caution!
This function is available for PROFIBUS-PA devices only!
Display at HART and Foundation
Fieldbus instrument
Display at PROFIBUS-PA instrument
47