Install Front, Trim And Barrier Screen; Install Remote Control Handset Wall Holder - Valor Portrait 530IN Installation & Owner's Manual

QUALIFIED
INSTALLER

Install Front, Trim and Barrier Screen

Install the front chosen by the customer for the
fi replace. Install as well the barrier screen which is
provided with the front or trim.
Show the customer how to access the controls when
the front or trim are installed and how to remove them
the front or trim.
Follow the instructions provided with the front or trim
and leave those instructions behind for the customer's
further reference.

Install Remote Control Handset Wall Holder

The remote control kit for this fi replace comes
complete with a wall-mounted holder. This
holder is not required in all installations but
is provided as an optional feature for those
customers who wish to mount the remote
handset to the wall.
To install the holder to the wall, fi nd a
convenient location and use the hardware
provided with the kit. See the diagram on the
right for required hardware and confi gurations.
Note that the holder can be installed at the base
of a light switch plate.
IMPORTANT. The location of the remote control handset is important to assure proper
temperature regulation. To obtain a constant temperature, we recommend that the handset
should be between 3 and 15 feet away from the appliance but not directly above it. We also
advise that the handset should be located away from any other heat source and not in direct
sunlight as this may aff ect the temperature sensor located in the remote handset.
44
Installation
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1
Alternative 2
Alternative 3
Switch Plate