VEHICLE CARE
Post-Operation Care
When vehicle is used in salt-water en-
vironment (beach area, launching and
loading boats etc.), rinsing the vehi-
cle with fresh water is necessary to
preserve vehicle and its components.
Metallic parts lubrication is highly rec-
ommended. Use LUBRICANT AND
ANTI-CORROSIVE (P/N 779168) or an
equivalent. This must be performed at
the end of each operating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
Vehicle Cleaning
NOTICE
Never use a high pres-
sure washer to clean the vehicle.
USE LOW PRESSURE ONLY (like a
garden hose).
Pay attention to certain areas where
mud or debris can accumulate and po-
tentially cause wear, interferences or
promote corrosion.
Wash the vehicle with a soapy water
solution.
NOTICE
Never clean polypropy-
lene body parts with any petroleum
base cleaning products, as it will al-
ter the glossy finish.
Non Compatible Cleaning Products
MATERIAL
TYPE
Polypropylene
(body parts)
vbs2012-006-002_a
DO NOT USE ON POLYPROPYLENE
______________
NON-COMPATIBLE
CLEANING
PRODUCTS
ANY PETROLEUM
BASE CLEANING
PRODUCTS
XPS ATV FINISHING
SPRAY (P/N 219
701 704)
XPS ATV
CLEANING KIT
(P/N 219 701 713)
(it contains the above
XP-S ATV Finishing
Spray)
137