Seat - Can-Am 219 002 095 Operator's Manual

1) Seat

The seat is designed for an operator
only.
WARNING
Never allow anyone to seat as a
passenger on this vehicle.
Seat Removal
To remove the seat, push its latch for-
ward. This latch is located underneath
the rear of seat.
vmo2012-014-008_a
1. Seat latch
Pull seat rearward. Continue lifting
movement until you can release the
front retaining device under the seat
from the retaining bar, then completely
remove seat.
vmo2014-022-002_a
1. Retaining bar
Seat Installation
Position front end of seat so that the
front retaining device under the seat
engages with the retaining bar. When
seat rests in its position, firmly push
seat down to latch.
vmo2014-022-002_a
1. Retaining bar
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
Confirm that the operator's seat
is properly locked in position by
pulling back and up several times.
_______________
EQUIPMENT
WARNING
85