Pre-Ride Inspection Check List - Can-Am 219 002 095 Operator's Manual

PRE-RIDE INSPECTION

Pre-Ride Inspection Check List

What to Do Before Starting the Engine (Unpowered Electrical System)
ITEMS TO BE
INSPECTED
Engine oil
Coolant
Brake fluid
Leaks
Throttle lever
Parking brake
Tires
Wheels
Radiator
Drive shaft boots
Seat
Cargo
Chassis and
suspension
Engine air filter
CVT air filter
_______
52
INSPECTION TO PERFORM
Check engine oil level.
Check coolant level.
Check brake fluid level.
Check for any leaks under vehicle
Activate throttle lever several times to ensure it operates
freely. It must return to idle position when released
Apply parking brake and check if it operates properly
Check tire pressure and condition. Refer to
SPECIFICATIONS
Check wheels for damage and for abnormal play. Check
that lug nuts and beadlock screws are tightened. Refer to
WHEELS AND TIRES
for torque specification.
Check cleanliness of the radiator
Check drive shaft boots and protectors condition
Check if operator seat is in place and properly latched
If you transport a cargo, respect the load capacity.
LOADING THE CARGO RACKS
Refer to
Ensure cargo is properly secured to the rack
If you are pulling a trailer or another equipment:
– Check hitch (if applicable) and trailer ball condition
– Respect the tongue capacity (if applicable) and towing
capacity as indicated on the label affixed to the hitch or
SPECIFICATIONS
refer to
– Ensure trailer is properly secured to hitch (if applicable).
Check underneath vehicle for any debris on chassis or
suspension components and clean them properly
Inspect and clean engine air filter
Inspect and clean CVT air filter
SAFETY INFORMATION
for values and adjust according to load.
MAINTENANCE PROCEDURES
in
.
.
________
✔