Lifting The Front Of Vehicle - Can-Am Spyder RT Series Instructions Manual

UNCRATING
PREDELIVERY KIT
DESCRIPTION
M6 x 20 hexagonal flange
screw
Black M6 x 20 hexagonal
flanged forming screw
Gold M6 x 20 hexagonal
flange screw
Plastic rivet
Battery installation kit (2
bolts and 2 nuts)
M6 x 20 Torx screw
Plastic washer
M14 jam nut
M8 x 20 hexagonal flange
screw
M6 x 20 Torx screw
M5 x 25 countersunk
Torx screw
M5 retaining nut
Windshield spacer
Hose clamp

Lifting the Front of Vehicle

WARNING
No one should be standing in front or at the
back of the vehicle while straps are being cut.
1. Remove metal plate retaining front of vehicle to
crate base.
If you are planning to use a hoist to lift ve-
NOTE:
hicle from crate base for tire installation, only the
wood screws need to be removed at this time.
8 / 52
WHERE USED QTY
Rear
1
suspension
Front cargo
4
module
Front cargo
2
module
Service cover 2
Battery
1
terminals
Front panels 2
Front panels 2
Headlights 2
Front fenders 8
4
Windshield
Windshield 2
Windshield 2
Windshield 2
Air inlet duct 1
rbl2014-004-005_a
TYPICAL
1. Plate
2. Screws
3. Screws and nuts
2. Remove straps retaining side and front of vehi-
cle to crate base.
rbl2010-002-011_a
TYPICAL, LH SIDE
1. Side strap
rbl2014-004-032a
LH FRONT ILLUSTRATED
1. Front strap, each side
2014-1 PREDELIVERY