Troubleshooting Guidelines - Can-Am 219 002 095 Operator's Manual

TROUBLESHOOTING GUIDELINES

ENGINE DOES NOT TURN
1. Engine stop switch.
– Make sure that engine stop switch is in ON position.
2. D.E.S.S. key is not installed on D.E.S.S. post.
– Securely install key on D.E.S.S. post.
3. Transmission is not set on PARK or NEUTRAL.
– Set transmission either in PARK or in NEUTRAL (Only 570) or press the brake
lever.
4. Burnt fuse.
– Check main fuse condition.
5. Weak battery or loose connections.
– Check charging system.
– Check connections and terminals condition.
– Have the battery checked.
– Contact an authorized Can-Am dealer.
6. Wrong D.E.S.S. key, multifunction gauge display shows BAD KEY.
– Use the proper key for this vehicle.
7. Weak starter or loose connections.
– Check starter connections.
– Check starter relay.
8. Vehicle wakes up when START button is pressed.
– Seek service from an authorized Can-Am dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer to
the US EPA EMISSION-RELATED WARRANTY contained herein for informa-
tion about warranty claims.
ENGINE TURNS OVER BUT FAILS TO START
1. No fuel to the engine (spark plug dry when removed).
– Check fuel tank level.
– A failure of the fuel pump may have occurred.
– Check fuel pump fuse and relay.
– If engine does not start, seek service from an authorized Can-Am dealer,
repair shop, or person of your own choosing for maintenance, repair, or
replacement. Please refer to the US EPA EMISSION-RELATED WARRANTY
contained herein for information about warranty claims.
______________
156