Adjusting The Mattress Platform - Arjohuntleigh Enterprise E5000X Instructions For Use Manual

Adjusting the mattress platform

If a warning tone (beep) sounds when pressing a button, this
indicates that the bed is operating on the backup battery – refer
to the section Backup battery.
If a button is held down for more than 90 seconds, the function
will be automatically inhibited until the button is released. The
function must then be unlocked as described in the section
Function lockout.
WARNING
If the patient handset or ACP is dropped onto a hard surface,
check that all the buttons work correctly afterwards.
746-577-UK-6
The bed is provided with two control handsets: a patient
handset with basic controls only and a more
comprehensive attendant control panel (ACP) for use by
the carer. The functions on both handsets are described
separately over the next few pages.
To adjust the mattress platform: press and hold the
appropriate button until the required position is achieved.
Movement will continue until the button is released or the
limit of travel is reached.
34