Installation; Cautions And Warnings; Electrostatic Discharge (Esd); Front Panel Copper And Fiber Ports - Transition Networks M/GE-SW-SFP-01-U Series User Manual

Transition Networks

2. Installation

Cautions and Warnings

Cautions
indicate that there is the possibility of poor equipment performance or potential damage to the
Warnings
equipment. indicate that there is the possibility of injury to person.
Cautions and Warnings appear here and may appear throughout this manual where appropriate.
Failure to read and understand the information identified by this symbol could result in poor equipment
performance, damage to the equipment, or injury to persons.
See Electrical Safety Warnings

Electrostatic Discharge (ESD)

Observe these ESD precautions when installing or handing the M/GE-xSW-SFP-01-xx-UxX:
Do not remove the converter from its protective packaging until you are ready to install M/GE-xSW-SFP-01-xx-
•
UxX Series media converter.
Wear an ESD wrist grounding strap before handling the M/GE-xSW-SFP-01-xx-UxX Series media converter or
•
its component. If you do not have a wrist strap, maintain grounded contact with the unit throughout any
procedure requiring ESD protection.

Front Panel Copper and Fiber Ports

The figure below shows the front panel of the M/GE-xSW-SFP-01-xx-UxX Series media converters.
33781 Rev. B
on page 23 for Electrical Safety Warnings translated into multiple languages.
https://www.transition.com/
M-GE-xSW-SFP-01-xx-UxX Series User Guide
Page 7 of 22