General Notes On Damage To Property And Damage To The Product; Scope Of Delivery - Bosch Rexroth VT-HMC 1X Series Operating Instructions Manual

12/36 Digital axis control VT-HMC...1X | General notes on damage to property and damage to the product
Bosch Rexroth AG, Edition 01.2021, RE 30239-B
3 General notes on damage
to property and damage to
the product
High voltage!
The digital axis control may be damaged.
▶ Wire the digital axis control only when disconnected from the power supply.
Wrong cables! Power loss, scorching of cable!
Risk of damage to the product!
▶ Only use the cables specified in the data sheet with the respective cable
cross-sections for the digital axis control.
Overloading!
Risk of overloading and damage to the supply cable in the case of insufficient
dimensioning and/or operation with several electrical devices.
▶ Provide current limitation by overload protection.
▶ Select an appropriate rating of the power supply unit and cable.
Short-circuit!
Risk of overloading and damage of the supply cable in the case of defects of the
electrical device.
▶ Provide current limitation by overload protection.
Impermissible temperature range!
Risk of overheating. The device can be thermally destroyed.
▶ Adhere to the specification in the data sheet.
The warranty only applies to the delivered configuration.
The warranty becomes void if the product is incorrectly mounted, commissioned
or operated, not used as intended and/or handled improperly.

4 Scope of delivery

The scope of delivery includes:
• Digital axis control VT-HMC...1X
• Mating connectors for XD1 and XG20/XG21:
– XD1: Weidmüller BLZF 3.50/03/180F SN BK...
– XG20/XG21: Weidmüller B2CF 3.50/30/180 LH SN BK...
– Keying elements: Weidmüller B2L/S2L 3.50 KO BK BX
Accessories such as cables and mains adaptor and cable sets are not included
in the scope of supply, but have to be ordered separately. See also chapter 7.2
"Recommended accessories" on page 17.
NOTICE