Vogt VH 25 Translation Of The Original Operating Manual page 9

Control elements
1
1
VOGT TurboSpade
Control elements
1
US edition 2021/01
Contact:
+49(0)92 78-774 33-0
+49(0)92 78-774 33-11
www.vogt-tec.com
VH 50 / VH 50 Delta: This device is the same as a VH 60 / VH 60 Delta
„
but without the vibration damping system.
All versions of the VOGT Hammer can be supplied in different device
lengths, allowing the device to be adapted even more closely to suit its
area of application and the user.
1. Trigger lever
The trigger lever is used to start up the VOGT Hammer. The rammer is
supplied with compressed air while the trigger lever is pressed down.
With a low blow frequency but a high blow force and a sturdy 18 mm chis-
el holder, the VOGT TurboSpade is ideal for vertical work. The wide range
of tools available makes the VOGT TurboSpade suitable for tasks such as
digging, breaking up, compacting, and ramming.
Its T-shaped handle makes it particularly easy on the back when working.
The vibration damping system on the VOGT TurboSpade VTS 60 serves to
reduce the vibration load. An alternative option is the VOGT TurboSpade
VTS 50, which comes without a vibration damping system.
All versions of the VOGT TurboSpade can be supplied in different device
lengths, allowing the device to be adapted even more closely to suit its
area of application and the user.
1. Trigger lever
The trigger lever is used to start up the VOGT TurboSpade. The rammer is
supplied with compressed air while the trigger lever is pressed down.
VH / VTS / VBL / VAI Translation of the original operating manual
Components and tools
Subject to change without notice
9