M 5000 / M 5000.18 Scraper Holder; Attaching The Parquet Wedge And Frankenklinge Blades To The M 5000 / M 5000.18 Scraper Holder; Devlection Device To The M 5000 / M 5000.18 Scraper Holder; Assembly From Below - Vogt VH 25 Translation Of The Original Operating Manual

13�4 Attaching the parquet wedge and Frankenklinge blades
to the M 5000/M 5000�18 scraper holder
Parquet wedge
Frankenklinge
Holding plate with pressed-in
screws
Mounting devices 1x Holding plate, 1x Reinforcing sheet metal, 2x Retaining lock nut
Insert the holding
plate from below
through the scraper
holder.
13�5 Attaching the devlection device and scrapers to the
M 5000/M 5000�18 scraper holder
Deflection device
Scraper
CAUTION: beveled side below!
Holding plate with pressed-in
screws
Mounting devices 1x Holding plate, 1x Reinforcing sheet metal, 2x Retaining lock nut
Insert the holding Push the scraper
plate from below on to the holding
through the scraper
holder.
US edition 2021/01
Contact:
+49(0)92 78-774 33-0
+49(0)92 78-774 33-11
www.vogt-tec.com
Retaining lock
nut
Push the Frankenklinge Push the parquet
blade on to the wedge on to the
threaded pins. threaded pins.
Retaining lock
nut
Push the deviator
device on to the
plate. holding plate.
VH / VTS / VBL / VAI Translation of the original operating manual
Scraper must rest
Scraper holder M 5000 / M 5000.18
on the edge
902 060
Screw on the wedge
securing nuts by
hand.
Scraper holder M 5000 / M 5000.18
Reinforcing sheet
meta
Scraper must
rest on the edge
902 020
Push the reinforcement Screw on the
plate (black plate) on to Retaining
the threaded plate. lock nut by hand.
Assembly Instructions Assembly Instructions
Mounted:
Parquet wedge
with Frankenklinge
Tighten with a
wrench.
Mounted:
Schaber
Scraper with
Deflection device
Tighten with a
wrench.
Subject to change without notice
53