Table of Contents
Advertisement
Operating instructions:
rtsp://IP:Port/ch01/A A:0(Main Stream), 1(Sub Stream), 2(Stream Mobile):
10.3.7
FTP
FTP: the FTP service setting is used with the alarm function to send images to the FTP server.
Select FTP in the Network menu to open the following page:
FTP Enable: Enables or excludes the FTP function.
Server: Enters the address of the FTP server.
Port: FTP service port number; the default number is 21.
Username: The username for access to the FTP service.
Password: The password for access to the FTP service.
Transfer images: Select to allow the sending of images.
DS1099-024B
27
Advertisement
Table of Contents
