Spectrum Digital XDS560R Installation Manual page 13

Distributor of Spectrum Digital Inc: Excellent Integrated System Limited
Datasheet of 702570 - TARGET ADAPTER CBL 20P CTI JTAG
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
Spectrum Digital, Inc
2.1 What You'll Need
The following checklists detail items that are shipped with the XDS560R JTAG
emulator and additional items you'll need to use these tools.
Hardware checklist
__ host
__ memory
__ display
__ emulator module XDS560R JTAG emulator with power supply, USB cable
__ target system
__ connector to
target system
Software checklist
Please refer to the Quick Start Guide for the specific requirements of the software
development tool chain you are using.
2-2
An IBM PC/AT or 100% compatible PC or laptop running Windows XP
or Windows 2000 with the following peripherals: a hard-disk
system, a CD-ROM disk drive, a USB port
Minimum of 32MB
Color VGA or LCD
A board with a TI DSP or Microcontroller and power supply
Standard 14-pin (2x7) or 20-pin CTI (2x10) connector --- see Chapter 3
for more information about these connectors
XDS560R JTAG Emulator Installation Guide