Spectrum Digital XDS560R Installation Manual page 9

Distributor of Spectrum Digital Inc: Excellent Integrated System Limited
Datasheet of 702570 - TARGET ADAPTER CBL 20P CTI JTAG
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
Spectrum Digital, Inc
1.0 Overview of the XDS560R JTAG Emulator
The XDS560R JTAG Emulator is designed to be used with digital signal processors
(DSPs) and microprocessors which operate from +1.0 to +5 volt levels on the JTAG
interface. The power for the emulator comes from the provided supply. This means no
power is drawn from the target system or host PC.
The XDS560R is designed to be compatible with the existing Texas Instruments
XDS560 emulator and operates with debuggers provided by Texas Instruments.
1.1 Key Features of the XDS560R JTAG Emulator
The XDS560R JTAG Emulator has the following features:
• Supports Texas Instrument's Digital Signal Processors with JTAG interface
(IEEE 1149.1)
• Compatible with Texas Instrument's XDS560 emulator.
• Modular tail connector for alternate JTAG headers.
• Advanced emulation controller provides high performance.
• Compatible with USB 2.0 interface on host PC, no adapter card required.
• Supports +1.0 volt to +5 volt JTAG interfaces.
• 5 LEDs for operational status.
• User accessible RESET switch
• Power provided by supplied power supply
• Compatible with Texas Instruments Code Composer Studio, DSP BIOS,
RTDX, and HSRTDX
• Compatible with Windows 2000, and Windows XP Operating Systems
1-2 XDS560R JTAG Emulator Installation Guide