Purpose And Overview Of The Operating Instructions; How To Use The Operating Instructions - Weber Geset 117 Original User Manual

Table of Contents

Advertisement

Chapter 1 General information

Purpose and overview of the operating instructions

These operating instructions will help you get to know the system Geset 117 and use it
properly.
They contain important instructions for the user on how to use the system safely and
correctly. Its consideration helps to:
Avoid hazards,
Minimize repair costs and outages and
Increase the reliability and service life of the machine.
The operating instructions are for the system identified in the title with the stated type
number.
The operating instructions must always be available wherever the system is used. They
must be read and used by everyone assigned to work with the system.
Printing mistakes, errors, and changes to maintain the state-of-the-art may occur.
Illustrations without protection devices may be presented for the sake of illustration.

How to use the operating instructions

Detailed explanations are offered below of the conventions for the text and illustrations
which are used in this manual.
Buttons, switches and pushbuttons that need to be pressed are placed in
brackets.
Ex.: Press the [Start] button to accept the changes...
Menu points and links to chapters and keywords are places in "..."
Ex.: The pushbutton "Turning plate infeed/outfeed passage"...
Procedures that need to be performed in a fixed sequence have to be
numbered.
Step
1
Special information is in bold and/or has a gray background
This is an example of special information!
All figures (Fig.) are numbered sequentially for each chapter. This means that the
reference "Fig. 2-1" corresponds to the first figure in chapter 2.
Illustrations are frequently shown with only the essential information and may
therefore deviate from the original. Illustrations are therefore shown without covers
or protection device for the sake of clarity.
Illustrations limit itself partly to the depiction of one variant (e. g. only RH, only LH,
or only [System1]...). It is particularly valid for example figures if the information
content is transferred logically to other system versions.
Version: 15.01.14
Procedure
Pull the power plug...
page 6 of 59
40002674 BTA Geset 117
GB

Advertisement

Table of Contents
loading

Table of Contents