Table of Contents
Advertisement
Chapter 2 Safety regulations
Safety instructions
Version: 15.01.14
Hazard from direct or indirect contact with voltage-
conducting parts.
DANGER TO LIFE!
When individuals touch parts that conduct electricity arising from
malfunctions.
- Only electricians may work on the switch cabinet and
electrical equipment.
- Regularly check the electrical equipment of the labeling
system. Immediately take care of loose connections and
damaged cables.
- Always keep the switch cabinet locked.
- Before working on electrical equipment, switch the miniature
circuit breaker to "0" position and secure it against being ac-
cidentally turned on. If possible, disconnect the power.
Hazard from easily flammable label material.
FIRE HAZARD!
The ribbon and labels are easily flammable. Potential injury from
fire and smoke.
- Keep away from sources of ignition and open fire.
Hazard from rotating elements.
DANGER OF BEING PULLED IN!
Rotating elements at the labeling station, like rewinder, driving-
and transport rollers ... are driven by a motor
- Do not grip in, at or between the moving parts.
Hazard from actively controlled movements.
CRUSHING HAZARD!
The movements of the labeling station are motor-driven by an
automatic controller.
- Maintain a distance from moving parts.
Tripping hazard from connecting lines.
RISK OF INJURY!
Connecting lines for power, compressed air and computer and
signal lines can pose a tripping hazard, causing serious injury.
- Release the tension of connecting lines to the system and
run them so that they do not pose a hazard
page 15 of 59
40002674 BTA Geset 117
GB
Advertisement
Table of Contents
