Chapter 9 Maintenance
Exchange of rollers
The lifetime of drive rollers in the bearings depend on the appropriate load and the
conveyor speed.
They are normally sufficient for an operational time of 4-5 years. After this time it is
advisable to exchange the bearing or rollers.
Spare parts
Safety instructions
Wiring diagram
The wiring diagram is included in switch cabinet.
Version: 15.01.14
Hazard from incorrect spare parts!
HEALTH HAZARD!
Incorrect or faulty spare parts can impair safety and cause injury or
damage to the machine
- Only use original spare parts or parts that are specifically ap-
proved by the Bluhm Weber Group.
page 53 of 59
40002674 BTA Geset 117
GB