Table of Contents
Advertisement
Chapter 4 Description of the labeling system
4.
Description of the labeling system
The labeling station is used to label square products on their top and bottom side
automatically.
Depending on kind and dimension of the product, different label sizes are used.
Further function descriptions about machine components can be found in the
chapter "Adjustment and initial operation".
Infeed
The products are fed manually or by a conveying system provided by the customer at
infeed passage of the labeling station. Care should be taken on accurate alignment of the
products.
These are held by side guidance on the base conveyor in a row.
Top side labeling
A labeler that is installed above the base conveyor applies the labels in throughfeed on
the top side of the product.
Bottom side labeling
A labeler that is installed below the base conveyor applies the labels in throughfeed on the
bottom side of the product.
Outfeed
The base conveyor forwards the finished labeled products to the outfeed. Here the
products are removed manually or via the customer's conveying system.
Version: 15.01.14
page 23 of 59
40002674 BTA Geset 117
GB
Advertisement
Table of Contents
