Table of Contents
Advertisement
Chapter 2 Safety regulations
Warnings on the labeling system
Special hazards arising from the labeling system are identified with yellow stickers. The
pictograms indicate hazards:
Remaining risks
The labeler is constructed in a way that makes it safe for use. Some hazards are inherent
in the design and construction but can be minimized with the corresponding safety
mechanisms and equipment. A certain residual risk always exists when operating
machinery. Knowledge about residual risks of the system helps you to increase your
safety awareness and avoid accidents. To prevent hazards, observe the special safety
instructions and each chapter. When connecting the labeler to the customer's conveying
system, there may arise hazard areas at the transitions. Suitable protection measures
have to be arranged in this case.
Version: 15.01.14
*²
Danger
Life-threatening hazard due to electrical power
Crushing hazard
Entanglement hazard
*²
Danger due to strong light radiation
Observe manual
page 17 of 59
40002674 BTA Geset 117
*² Only if system has the appropriate features.
GB
Advertisement
Table of Contents
