Table of Contents
Advertisement
Chapter 9 Maintenance
Cleaning of sensors
Safety instructions
Maintain the optics of the light sensors and light barriers free of dust and grease. Use for
cleaning a smooth, lintfree cleaning cloth.
Requirements
¥
Labeler is without electrical power and compressed air.
¥
No transportation of products.
Required equipment
¥
Smooth, lint-free cleaning cloth.
Instruction
Please clean the light barrier and sensors as follows
Step
1
Version: 15.01.14
Unintended system start
RISK OF INJURY!
When cleaning the light sensors and light barriers, it may be
triggered an accidentally reaction of the labeling station due to
approaching or touching.
- Turn off the labeling station before cleaning.
*² Hazard from light beams.
RISK OF INJURY!
*²Sensors or *²camera illumination may have high light intensity
- Do not look directly into the light source.
Damages due to incorrect detergents
The light sensors and barriers may be damaged when cleaning
with compressed air, steam cleaner, aggressive dissolvers or
scrubbing agents
- Do not use any liquids that may cause short circuits
- Do not use aggressive dissolvers or scrubbing agents
- Do not use hard or sharp-edged parts for cleaning
Procedure
Wipe the optics and the reflectors with the cleaning cloth.
page 49 of 59
40002674 BTA Geset 117
*² Only if system has the appropriate features.
GB
Advertisement
Table of Contents
