Static Warning - Emerson NetSure-48 VDC Power System Installation Instructions Manual

™
NetSure -48 VDC Power System
Installation Instructions, IM582127000100 (Revision A, January 9, 2017)

Static Warning

This equipment contains static sensitive components. The warnings listed below must be observed to prevent damage to these
components. Disregarding any of these warnings may result in personal injury or damage to the equipment.
1. Strictly adhere to the procedures provided in this document.
2. Before touching any equipment containing static sensitive components, discharge all static electricity from yourself by wearing
a wrist strap grounded through a one megohm resistor. Some wrist straps, such as P/N 631810600, have a built-in one
megohm resistor; no external resistor is necessary. Read and follow wrist strap manufacturer's instructions outlining use of a
specific wrist strap.
3. Do not touch traces or components on equipment containing static sensitive components.
Handle equipment containing static sensitive components only by the edges that do not have connector pads.
4. After removing equipment containing static sensitive components, place the equipment only on conductive or anti-static
material such as conductive foam, conductive plastic, or aluminum foil. Do not use ordinary Styrofoam
5. Store and ship equipment containing static sensitive components only in static shielding containers.
6. If necessary to repair equipment containing static sensitive components, wear an appropriately grounded wrist strap, work on a
conductive surface, use a grounded soldering iron, and use grounded test equipment.
Spec. No: 582127000100, 582127000103
Model No: 7100
[vi]
™ or ordinary plastic.
Document Code: IM582127000100
Revision A, January 9, 2017