Table of Contents
Advertisement
™
NetSure
-48 VDC Power System
Installation Instructions, IM582127000100 (Revision A, January 9, 2017)
Installing an Optional Bullet Nose Type 6-Position GMT Distribution Fuse Block (P/N 549017)
NOTE: Refer to
Figure 10
Procedure
1.
Open the distribution cabinet's front door by turning the latch in the counterclockwise position.
2.
Follow the steps in
Figure
3.
Install an appropriately sized GMT fuse in each fuse mounting position on the GMT Distribution Fuse Block as required. If
dummy fuses are installed, first remove the dummy fuse.
a.
Verify that dummy fuses are installed in all unused fuse positions on the GMT distribution fuse block.
b.
Verify that a plastic safety cover is installed on all GMT fuses on the GMT distribution fuse block.
4.
Record all fuse sizes (installed on the GMT distribution fuse block) on the label provided on the shield.
5.
Close the distribution cabinet's front door. Turn the latch clockwise to secure the door.
Spec. No: 582127000100, 582127000103
Model No: 7100
as this procedure is performed.
10.
[13]
Document Code: IM582127000100
Revision A, January 9, 2017
Advertisement
Table of Contents
