Emerson NetSure-48 VDC Power System Installation Instructions Manual page 41

™
NetSure -48 VDC Power System
Installation Instructions, IM582127000100 (Revision A, January 9, 2017)
Table 9. Programmable Relay Outputs – EIB
Programmable Relay
Output
NO
1 COM
NC
NO
2 COM
NC
NO
3 COM
NC
NO
4 COM
NC
NO
5 COM
NC
NOTE: The relays energize during an alarm condition, closing the contacts between the C and NO terminals, and opening the
contacts between the C and NC terminals.
Refer to the configuration drawing (C-drawing) supplied with your system for your system's specific relay labeling.
Spec. No: 582127000100, 582127000103
Model No: 7100
EIB Alarms Assigned to this Relay
Pin No. (Default)
J8-5
J8-3
J8-1
J8-6
J8-4
J8-2
The relays may be preprogrammed
J9-5
for specific functions. Refer to the
J9-3 configuration drawing (C-drawing)
supplied with your system for your
J9-1
system's specific configuration.
J9-6
J9-4
J9-2
J7-6
J7-4
J7-2
[33]
Alarms Assigned to this Relay
(Custom)
Document Code: IM582127000100
Revision A, January 9, 2017