Table of Contents
Advertisement
™
NetSure
-48 VDC Power System
Installation Instructions, IM582127000100 (Revision A, January 9, 2017)
Installing Battery Disconnect Circuit Breakers onto Battery Trays
Procedure
1.
To install battery disconnect circuit breakers onto battery trays, perform the procedure detailed in
Figure 3.
Installing Battery Disconnect Circuit Breakers onto Battery Trays
Spec. No: 582127000100, 582127000103
Model No: 7100
Battery Disconnect
Circuit Breaker Assembly
(left side kit shown,
right side kit available)
[4]
1. Remove the cover from the battery
disconnect circuit breaker assembly.
2. Secure the battery disconnect circuit
breaker assembly to the battery tray
using 8-32 nuts (2-places) and #8 flat
washer (1-place) or #8 ground washer
(1-place).
3. After wiring to the battery disconnect
circuit breaker, replace the cover.
Figure
3.
Document Code: IM582127000100
Revision A, January 9, 2017
Advertisement
Table of Contents
