Fluid Compatibility Charts - Graco HUSKY 715 Instructions-Parts List Manual

IMPORTANT: The following charts are guides to select-
ing the pump that is compatible with the fluid you will be
pumping. These recommendations are based solely on
the materials of pump construction (refer to the Technical
Data on pages 31–35). It is the responsibility of the user
to follow the recommendations of the fluid manufacturer
and any local, state, and federal guidelines for safe han-
dling of a particular fluid. Read and follow all warnings re-
garding fluid use and compatibility given in this manual.
FLUID Pump 220–617
( PTFE
Acid
Inorganic POOR
Organic FAIR
Alcohols EXCELLENT
Aldehydes VERY GOOD
Aliphatics EXCELLENT
Alkalies POOR
Amines VARIES
Animal Oils EXCELLENT
Aromatics EXCELLENT
Esters
Alkyl Phosphate POOR
Aryl Phosphate VARIES
Silicate VARIES
Ethers EXCELLENT
Halogenated Solvents GOOD
Hydrocarbon Oils EXCELLENT
Ketones EXCELLENT
Silicone Oils EXCELLENT
Water EXCELLENT
POLYPROPYLENE PUMP MODELS 223–154 AND 223–155
FLUID Pump 223–154
PTFE
(
Acid*
Inorganic VERY GOOD
Organic VERY GOOD
Alcohols EXCELLENT
Aldehydes FAIR
Aliphatics FAIR
Alkalies VERY GOOD
Amines FAIR
Animal Oils EXCELLENT
Aromatics POOR
Esters
Alkyl Phosphate VERY GOOD
Aryl Phosphate VARIES
Ethers POOR
Halogenated Solvents POOR
Hydrocarbon Oils FAIR
Ketones FAIR
Silicone Oils EXCELLENT
Water EXCELLENT

FLUID COMPATIBILITY CHARTS

ACETAL PUMP MODELS 220–617 AND 220–618
Pump 220–618
(buna–N)
)
POOR
FAIR
VERY GOOD
POOR – FAIR
EXCELLENT
POOR
POOR
VARIES
VARIES
POOR
FAIR – POOR
VERY GOOD
POOR
FAIR – POOR
VERY GOOD
POOR
EXCELLENT
EXCELLENT
Pump 223–155
(buna–N)
)
POOR
FAIR
VERY GOOD
POOR – FAIR
FAIR
POOR
POOR
EXCELLENT
POOR
POOR
POOR
POOR
FAIR – POOR
FAIR
POOR
GOOD
EXCELLENT
CAUTION
Safe Operating Temperature
Minimum: 40 F (4.4 C); Maximum: 150 F (66 C)
These temperatures are based upon mechanical
stress only and may be significantly altered by
pumping certain chemicals. Consult engineering
guides for chemical compatibilities and temperature
limits, or contact Graco T
1–800–543–0339.
This chart is only a guide to selecting the pump and dia-
phragm material which is compatible with the fluid you
are pumping. Always read and follow the fluid supplier's
recommendations on material and fluid compatibility.
WARNING
To reduce the risk of serious bodily injury and prop-
erty damage from component rupture, always fol-
low these precautions:
1. Never use fluids in this pump which are not
compatible with the wetted parts listed in the
Technical Data on pages 31–35, or with the
diaphragm of this pump.
2. Read and follow all warnings regarding USING
HAZARDOUS FLUIDS and Fluid Compati-
bility on page 3.
This chart is only a guide to selecting the pump and dia-
phragm material which is compatible with the fluid you
are pumping. Always read and follow the fluid supplier's
recommendations on material and fluid compatibility.
* Polypropylene is glass–filled and not suitable for
pumping hydrofluoric acid.
Contact with any acids or exposure to acid fumes will
damage the acetal and stainless steel non–wetted
parts of the polypropylene pumps.
WARNING
To reduce the risk of serious bodily injury and prop-
erty damage from component rupture, always fol-
low these precautions:
1. Never use fluids in this pump which are not
compatible with the wetted parts listed in the
Technical Data on pages 31–35, or with the
diaphragm of this pump.
2. Read and follow all warnings regarding USING
HAZARDOUS FLUIDS and Fluid Compati-
bility on page 3.
echnical Assistance: