Graco HUSKY 715 Instructions-Parts List Manual page 29

Air Regulator 110–318
300 psi (21 bar) MAXIMUM WORKING PRESSURE
0–180 psi (0–12 bar) Adjustment Range.
Use with Gauge 110–319. 1/4 npt(f) inlet and outlet.
Bleed–Type Master Air Valve 107–142
300 psi (21 bar) MAXIMUM WORKING PRESSURE
Relieves air trapped in
the air line between the
pump air inlet and this
valve when it is closed.
1/2 npt inlet and outlet.
Groundable Air Hose 221–169
300 psi (21 bar) MAXIMUM WORKING PRESSURE
10 ft (3 m) long, 1/2 in. ID, coupled 1/2 npt(m) x 1/4 npt(m)
Air Line Filter 106–148
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
Reusable 40 micron filter and drain cock.
3/8 npt(f) inlet and outlet.
Air Line Lubricator 214–847
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
OPTIONAL. For automatic air valve lubrication.
3/8 npt(f) inlet and outlet.
Fluid Drain Valve
500 psi (35 bar) MAXIMUM WORKING PRESSURE
Use at fluid outlet to help relieve pressure.
210–071 Stainless steel and
208–391 PTFE
Steel and
ACCESSORIES (continued)
Accessories must be purchased separately .
Use only GENUINE GRACO PARTS AND ACCESSORIES.
PTFE
3/8 npt(m x f)
3/8 npt(m x f)
Fluid Regulator 214–706
5–100 psi (0–7 bar) REGULA TED PRESSURE RANGE
Stainless steel regulator and gauge.
Inlet: 3/8 npsm(f) Outlet: 3/8 npt (f)
Dynamic Surge Suppressor
120 psi (8 bar) MAXIMUM WORKING PRESSURE
Use to maintain a consistent fluid pressure and dampen
pressure surges. 3/4 npt(f) fluid inlet and outlet, 1/4 npt(f)
air inlet. Instructions included.
224–892
Aluminum
PTFE
( diaphragm)
224–893
Aluminum
(buna–N diaphragm)
224–894
Stainless Steel
PTFE
( diaphragm)
224–895
Stainless Steel
(buna–N diaphragm)
Gun Mounted Fluid Regulator 223–623
5–100 psi (0–7 bar) REGULA TED PRESSURE RANGE
Stainless steel regulator for circulating air spray applica-
PTFE diaphragm. Inlet & Outlet: 1/4 npsm(m). Re-
tions.
quires 204–891 Coupler Stem to connect to gun.
Fluid Ball Valves
102–902 Nylon and Viton ; 3/4 npt(fbe)
150 psi (10.5 bar) Maximum WPR
102–735 PTFE
Brass and
875 psi (61 bar) Maximum WPR
Groundable Fluid Hoses
500 psi (35 bar) MAXIMUM WORKING PRESSURE
Nylon core, urethane cover
3/4" ID, 3/4 npt mbe, stainless steel fittings
221–170 3 ft (0.9 m) long
221–171 6 ft (1.8 m) long
221–172
10 ft (3.0 m) long
221–173 25 ft (7.6 m) long
PTFE diaphragm.
Ä Ä
0903
0688
; 3/4 npt(fbe)