Venting Exhaust Air (Pump Shown Submerged) - Graco HUSKY 715 Instructions-Parts List Manual

NOTE: For Lube Evacuation Systems using Model 223–747, refer to the Installation section in manual 308–035.
Fig 4
KEY
A Air Line to Gun
B
Bleed–type Master
Air Valve
C Air Filter
D
Air Regulator & Gauge
G Drain Valve
J Fluid Outlet Hose
P
Circulating Valve
S Return Line
T
5 Gallon Pail Mount
Kit 221–095
U Agitator Kit 221–096
W
Ground Wire
Fig 5
TYPICAL INSTALLATIONS
VENTING EXHAUST AIR (Submerged Installation Shown)
See Fig 2 for air line accessories
In a submerged installation (as shown), all wetted and non–wetted
pump parts must be compatible with the fluid being pumped. DO NOT
use polypropylene pumps in submerged installations.
AIR SPRAY INSTALLATION
See Fig 2 for air line accessories
D B
C
U
T
MUFFLER
GROUNDED AIR EXHAUST HOSE
(MINIMUM 3/8 in. ID x 15 ft LONG)
A
J
G
W
CONTAINER FOR
REMOTE AIR EX-
HAUST
0855A
P
S
0857A