Graco HUSKY 715 Instructions-Parts List Manual page 32

Model 220–617 Acetal Pump, with
Maximum Fluid Working Pressure
Air Pressure Operating Range 25–100 psi (1.75–7 bar)
Maximum Air Consumption
Maximum Free Flow Delivery
Maximum Pump Speed . . . . . . . . . . . . . . . . . .
Gallons (liters) Per Cycle
Maximum Suction Lift ( water )
GPM Loss at 5 ft (1.5 m) lift
10 ft (3.1 m) lift
15 ft (4.6 m) lift
Maximum Size Pumpable Solids
Maximum Noise Level . . . . . . . . . . . . . . . . . . . . .
(8.4)
(7)
100 psi
(5.6)
(4.2)
(2.8)
(1.4)
TEST CONDITIONS
Pump tested in water with inlet submerged.
To find Outlet Pressure (bar/psi) at a specific delivery
(gpm [liter]/min) and operating air pressure (psi/bar):
1. Locate desired delivery along bottom of chart.
2. Read vertical line up to intersection with selected
fluid outlet pressure curve. Follow left to scale and
read outlet pressure.
TECHNICAL DATA
. . . . . 100 psi (7 bar)
. . . . 19 SCFM (see chart)
. . . . . . 16 gpm (60 l/min)
.200 cpm
. . . . . . . . . . . . . . . . . 0.08 (0.3)
. . . . . . . 16 ft (4.8 m) dry
25 ft (7.6 m) wet
. . . . . . . . . 2 gpm (7 l/min)
. . . . . . . . 3 gpm (11 l/min)
. . . . . . 4.5 gpm (17 l/min)
. . . 3/32 in. (2.5 mm)
85 dBa
PERFORMANCE CHART
2 SCFM
5 SCFM
70 psi
40 psi
20 psi
(7.5) (15) (22.7)
FLUID FLOW GPM (lpm)
PTFE
Diaphragm
Maximum Operating Temperature
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted Parts . . . .
Non–wetted External Parts
Polyester (labels), 303 Stainless Steel,
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PTFE
and V iton
Loctite is a registered trademark of the Loctite Corp.
10 SCFM
15 SCFM
(30) (37.9) (45.4) (53)
KEY
FLUID PRESSURE AND FLOW
SCFM AIR CONSUMPTION
To find Pump Air Consumption (SCFM) at specific
fluid delivery and pressure.
1. Locate desired fluid delivery and pressure on chart.
2. Interpolate air consumption, noting bold lines of con-
stant air consumption.
. . . . 150 F (65 C)
Acetal, Glass–Filled Acetal,
. . . . . Acetal, Polyethylene,
Zinc–Plated Stainless Steel
7 lb (3.1 kg)
20 SCFM
(60.5) (68)
1/4 npt(f)
3/4 npt(f)
3/4 npt(f)
PTFE