Page 1
Instructions - Parts Feed Pump Kits 309815T For supplying polyurethane materials from 55 gal. (200 liter) drums to Reactor™ proportioning systems. For professional use only. Not for use explosive atmospheres. Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.
WARNING Feed Pumps Part No. Description A warning alerts you to possible serious injury or 308981 Husky 515 Pump death if you do not follow instructions. 308981 Husky 716 Pump 312877 Husky 1050 Pump Operation Symbols, such as fire, explosion, and electric shock...
Page 4
Misuse can cause serious injury or death. • For professional use only. • Use equipment only for its intended purpose. Call your Graco distributor for information. • Read manuals, warnings, tags, and labels before operating equipment. Follow instructions. • Check equipment daily. Repair or replace worn or damaged parts immediately.
Installation Installation NOTE: For Husky 1050 Wall Mount Kit 246368, see 3. Position drums. Place A (ISO) and component B page 9. (RES) drums as desired. Air hose (C) connecting feed pumps is 15 ft (4.57 m) long. See F .
Page 6
Installation 5. Connect fluid supply kit. 7. Ground system. a. Install swivel union (102) in pump fluid outlet. WARNING Triton 308 only: Install 90° elbow (104) in pump outlet, then install swivel union (102) in elbow. Read warnings, page 4. Used on Triton 308 packages only.
Page 7
Installation Installation 246655 Package shown installed in Reactor proportioning system. Includes * parts only. NOTE: System shown 102* 101* (ISO) includes 246978 Circulation 304* Kit, available separately, *101 (RES) which includes two 247616 *102 desiccant dryers (6). Air Supply Kit. See 309827. *103 (Ref) 103* (Ref) TI7690A...
Page 8
Installation Installation with Circulation (T3 Pumps) NOTE: System shown includes 246978 Circulation Kit, available separately, which includes two 247616 desiccant dryers (6). (RES) (ISO) . 2. 309815T...
Installation Husky 1050 Wall Mount Standard 2:1 Kit 1. Be sure wall can support weight of pump, hoses, 1. Follow steps 1-3, page 5. and accessories, and can withstand stress during 2. Open drum bung hole. Screw bung adapter with operation.
Operation Operation Startup Shutdown 1. See Load fluid with feed pumps in Reactor opera- See Shutdown and Pressure Relief Procedure in tion manual. Reactor manual. Close feed pump bleed-type master air valve. 2. Open feed pump air regulator. 3. Open feed pump bleed-type master air valve. Changing Drums 4.
Parts Parts Complete Feed Pump Packages Part No. 246369, Husky 515 Package Ref. Part Description Qty. Part No. 246375, Husky 716 Package 246481 FLUID SUPPLY KIT, Husky 515 246482 FLUID SUPPLY KIT, Husky 716 Part No. 246376, Husky 1050 Package...
Page 12
Parts Part No. 246081, T2 2:1 Package Part No. 24Z987, SS T3 3:1 Package Ref. Part Description Qty. Ref. Part Description Qty. 246898 KIT, fluid supply 26A304 PUMP, transfer, 3:1, T3 295616 PUMP, 2:1; see 311882 246483 KIT, supply, air (feed pump, gun) 217382 HOSE, fluid;...
246419 RISER TUBE KIT; see page 16 158555 NIPPLE, reducing; 1 in. npt x 3/4 CAUTION 246484 Husky 515 Pump is built specifically for use CAUTION with isocyanates and is tested with oil. To order 246485 Husky 716 Pump is built specifically for use replacement parts and repair kits, refer to the Husky with isocyanates and is tested with oil.
Page 15
Parts Part No. 246368, Husky 1050 Pump Part No. 246654, Triton 308 Pump Ref. Part Description Qty. Ref. Part Description Qty. 647673 PUMP, Husky 1050; see 312877 233500 PUMP, Triton 308; see 309303 and 313435, and read CAUTION 246419 RISER TUBE KIT; see page 16 below 158555 NIPPLE, reducing;...
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
Need help?
Do you have a question about the Husky 515 and is the answer not in the manual?
Questions and answers