Mecmesin Vortex-dV Manual page 5

1 Vortex -dV Motorised Torque Test Stand Operating Manual
2 Introduction
2.1 User Manual Icons
2.1.1 Warning
2.1.2 Caution
2.1.3 Information
3 System Diagram
3.0.1
Identifying the Model of Vortex- dV
3.1
3.1.1 Mark 1
3.1.2 Interlock Enabled
4 Unpacking and Parts Supplied
4.1 Inspection and Unpacking
4.2 Packaging
4.3 Moving the Test Stand
4.4 Parts Supplied
4.5 Accessories
5 Initial Setup
5.1 License Key
5.2 Locating the Stand
5.3 Mains Power Supply
5.4 Fuse Specification
5.5 Attaching the Torque Sensor
5.6 Fitting the AFTI Torque Indicator
5.6.1 Connecting the AFTI and the Vortex -dV
5.6.2 AFTI Communication Settings
5.7 Connect the Test Stand to a PC (VectorPro Users Only)
5.8 Cable Management
5.9 Attaching Grips and Fixtures
5.10 Test Stand States
6 Front Panel Controls
6.1 Emergency Stop Button
6.2 Multi-function Scroll Wheel Control
6.2.1 Scroll Wheel Colours
6.2.2 Jog Mode
6.2.3 Navigational Control
6.2.4 Central Button
6.3 Vortex- dV Display Panel
6.4 On-Screen Icons
6.4.1 Pre-Test
6.4.2 During a Test
6.4.3 Pause/Stopped
6.4.4 Jog Mode
6.4.5 Settings Menu
7 Settings
7.1 Jog settings
7.2 Units
7.3 Edit Test
7.3.1 Cycle (by Angular Displacement)
7.3.2 AFTI Control/Torque Control
7.3.3 Data Capture within VectorPro™
5