During A Test - Mecmesin Vortex-dV Manual

6.4.2

During a Test

Icon Icon
6.4.3
Pause/Stopped
Icon Icon
Go to settings Go to settings
Move to the home position (Set within VectorPro or test start position) Move to the home position
Action Action
Pause test - This stops the lower spindle movement, leaving the stand in a state of test Pause test
readiness. The status message is 'Interrupted: User'
will be displayed.
Stop test - This will abort the current test running (including the VectorPro software). Stop test
The status message is 'Test aborted' 'Test aborted' and the 'Home
displayed.
Emergency stop button pushed: Message: 'Emergency Stop!!! Emergency stop button pushed: Message:
stop to regain control and remedy the situation before resuming testing. Note there is
no on-screen icon for the emergency stop.
Action Action
Continue test sequence Continue test sequence .
'Interrupted: User' and the 'Play
Home' and 'Exit
Emergency Stop!!!'. Release the emergency
Play' and 'Stop Stop' buttons
Exit' buttons will be
24