Toshiba TS3000 Series Instruction Manual page 99

series Robot Controller
Keys operative in this mode and their operations are shown below.
Key
←
→
↑
↓
ALT + ←
ALT + →
ALT + ↑
ALT + ↓
INS
ALT + BS
EXE
NEXT
ALT + NEXT
Used to move the main cursor to the left. If the main cursor is
located under the name column, it will not move any further.
When C data and subsequent data are displayed, move the
cursor from Z data to Y data and the screen scrolls to the right.
Used to move the main cursor to the right. When the main
cursor is located under the "CONFIG" column, it will not move
any further.
When moving the cursor from Z data to C data, the screen
scrolls to the left.
Used to move the main cursor up. If the main cursor is
located on the top line of the screen, the screen scrolls down.
If the main cursor is on the top data, it will not move any
further.
Used to move the main cursor down. If the main cursor is
located on the last line of the screen, the screen scrolls up.
If the main cursor is on the final data, it will not move any
further.
Used to display a positional data directory in a coordinate
system defined before.
Used to display a positional data directory in a coordinate
system defined after.
Used to move the main cursor up on the screen basis.
Used to move the main cursor down on the screen basis.
Used to create a new positional data just below the main
cursor line.
Used to delete a positional data indicated by the main cursor.
Used to edit a data indicated by the main cursor.
Used to toggle the menu (resulting in the next menu).
Used to toggle the menu (resulting in the previous menu).
– 5-5 –
OPERATOR'S MANUAL
Descriptions
STE 80720