Toshiba TS3000 Series Instruction Manual page 304

series Robot Controller
Used to display the next page. If the cursor is located at the
ALT + ↓ or
final page, the top page is selected.
NEXT
Used to display the previous page. If the cursor is located at
ALT + ↑ or
the top page, the final page is selected.
ALT + NEXT
Used to return the system to the utility display.
ESC
Operations of each command menu are shown below.
Menu
[ON] Used to set ON the bit indicated by the cursor.
[OFF] Used to set OFF the bit indicated by the cursor.
[DIN] Used to move to DIN display (user external input).
[DOUT] Used to move to DOUT display (user external output).
[SYS] Used to move to SYS (system) display.
(b) Step 2: Change of display.
Press the ALT + ↓ keys or the NEXT key (or ALT +↑, ALT + NEXT) at the
same time, and the display items are changed over. Display contents of
each page are shown below.
1 DIN (User external input)
Page 1 (general input)
I / O M o n i
1
D I N 0 * 0 0 0 0 0
2 * 0 0 0 0 0
4 * 0 0 0 0 0
6 * 0 0 0 0
t o r ( S t a n d a r d
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
D I N
– 10-7 –
OPERATOR'S MANUAL
Descriptions
I N )
1 0 1 1
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
D O U T
1 / 5
2 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
S Y S
STE 80720