Toshiba TS3000 Series Instruction Manual page 166

series Robot Controller
(b) Step 2: Data input.
Enter a desired value to the command line, using alphanumeric keys, → key,
and ← key. Then the following display appears.
T R A N S 0 0 0 0 2
X : 5 0 0 . 0 0 0
Y : 0 . 0 0 0
Z : 0 . 0 0 0
C : 0 . 0 0 0
1 0 0 _
S A V E T E A C H
Keys operative in this mode and their operations are shown below.
Key
Used to move the cursor left on the command line.
←
Used to move the cursor right on the command line.
→
Used to input characters on the command line.
Numeral
. + –
Used to change current coordinate element to an entered one.
EXE
The system returns to the display mode with the main cursor
moved to the next data area.
Used to select the insert or replace mode for the command
INS
line.
Used to delete one (1) character just before the cursor position
BS
on the command line.
Used to delete one (1) character at the cursor position on the
ALT + BS
command line.
This function works in a different manner according to the
ESC
presence or absence of input character(s).
Presence of input character(s): All input character(s) on the
command line are cleared.
Absence of input character(s): The system returns to the
detailed coordinate data directory display.
D I R W O R K
Descriptions
– 5-72 –
OPERATOR'S MANUAL
[ 3 / 1 1 ]
F I N D >
STE 80720