Parameterisation Of Transducer Blocks; Prerequisite - Pepperl+Fuchs FD0-VC-Ex4.FF Manual

6.5

Parameterisation of transducer blocks

6.5.1

Prerequisite

To parameterise the valve coupler FD0-VC-Ex4.FF the associated device description (DD) must be inclu-
ded in the engineering tool used. Unless integration has been made by the manufacturer of the control sys-
tem, you will find the necessary files on the enclosed data carrier and in Internet under
www.pepperl-fuchs.com.
How to import the device description into the control system is described in the operating manual of the lat-
ter. In general, the files are stored under a fixed directory in the sub-directory 502B46\0001 during import.
An extended integration exists for some control systems. The associated files can also be found
on the enclosed data carrier and in Internet under www.pepperl-fuchs.com.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Fieldbus Valve Coupler FD0-VC-Ex4.FF
Parameterisation and operation of the valve coupler
Copyright Pepperl+Fuchs, Printed in Germany
27