Table of Contents
Advertisement
Chapter 2 Appearance Description
2.1 Unpacking and Inspection
1.
Unpack the package, the unit should contain the following items:
1) 1 UPS
2) Accessories, including User Manual, RoHS Certificate of Compliance
and 2 door keys.
2.
Check to see if the UPS is damaged during delivery. In case of any damage
or any component missing, please do not start the UPS and contact the
carrier or dealer forwarder or distributor immediately.
Note: Make sure that there is a sufficient minimum clearance from any obstacle
before moving the UPS.
Figure 1: Cut the packing straps and remove the top cover plate.
Figure 2: Unbend the tucks locking all plates together, then remove these plates.
Figure 3: Remove the plastic bag and foam around the unit.
Figure 4: Remove the shipping brackets fixing the UPS to the pallet.
Figure 5: Attach the ramp to the front of the pallet.
Figure 6: Roll the UPS down the ramp and move it to the installation spot.
Figure 1
Figure 4
Figure 2
Figure 5
3
Figure 3
Figure 6
Advertisement
Chapters
Table of Contents
