Advantech WISE-4671 User Manual page 43

Cellular Information
This block shows information on the cellular RF module and cellular network status.
PIN Status: The PIN code status of the SIM card.

Register Status: Registration status of the cellular network operator.

Current Service Mode: Network service mode (e.g., LTE CAT-NB1)

Signal Strength: Indicates reference signal receiving power (RSRP) of the cel-

lular network.
IP Address: IP address assigned by the cellular network.

Operator Name: Name of the cellular network operator.

Modem Manufacturer: Manufacturer of the RF module.

IMEI Code: International Mobile Equipment Identity of the current modem.

IMSI Code: International Mobile Subscriber Identity of the current SIM card.

ICCID Code: Integrate Circuit Card Identity.

Firmware Information
In this page, you can check the model name and module description. The firmware
version is also shown at the end of the configuration web page. To update the firm-
ware, go to the Firmware Version section.
Module Name: Name of the WISE module.

Module Description: Description of the WISE module.

Firmware Description: Firmware and bootloader version of the WISE module.

Web Page Version: The web page version is given at the bottom of the Config-

uration page before the copyright information.
33 WISE-4671 User Manual