Connection Setting On Wise-4671; Configure Wise-4671-Ua By Using Wise-Studio - Advantech WISE-4671 User Manual

5.1

Connection Setting on WISE-4671

Configure the WISE-4671 module using WISE-Studio through a USB port.

5.1.1

Configure WISE-4671-UA by Using WISE-Studio

5.1.1.1 Minimum System Requirements
The minimum system requirements for WISE-Studio are as follows:
Microsoft Windows 7 or later

Microsoft .NET framework 3.5 or later

Internet Explorer 10 or later

5.1.1.2 Installing WISE-Studio
The latest version of WISE-Studio is available on the Advantech support website
http://support.advantech.com/. To install the software, download the installation file
and execute it locally.
5.1.1.3 Introduction to WISE-Studio
WISE-Studio is a tool for configuring WISE modules. The software provides a web-
based interface that is similar for different models. For WISE modules configured via
Ethernet, LAN, or WLAN, WISE-Studio enables communication with the WISE mod-
ule's internal web server. For modules configured via USB, WISE-Studio executes a
web server on the computer installed with the software. The web server then uses
the USB interface to communicate with the WISE module. The module information
can be accessed via the embedded web page or a web browser.
Communication Box
In this screen, there are several communication interfaces for configuring various
WISE modules. The WISE-4671 series uses the USB serial interface for configura-
tion.
Refresh: Pressing this button refreshes the USB serial interface.
USB-Serial: This block is for connecting to a WISE module via USB. The available
USB serial port number will be shown here. Click Go to Configuration to connect
the USB COM port.
USB-Serial Configuration Page
After clicking Go to Configuration, all available USB COM ports will be displayed.
WISE-4671 User Manual 62