Advantech WISE-4671 Startup Manual

WISE-4671
Advanced Industrial Cat.NB1/Cat.M1 Wireless I/O Module
Startup Manual
Overview
Thank you for purchasing the WISE-4671 module. This
quick start guide is intended to help you with deploying the
module. It includes information on the power requirements
and application wiring. Should you require more instruc-
tions, please refer to the user manual.
Input Power Requirements
The WISE-4671 has two pairs of external power inputs:
1. +Vs and -Vs (for line power or battery recharge)
2. Solar panel+ and solar panel- (for battery recharge)
Both power inputs support a standard industrial unregulated
24 V power supply. This series of modules also accept
DC
+10 to +50 V power input and 200-mV peak-to-peak
DC
power ripple. The immediate ripple voltage should be
between +10 and +50 V .
DC
Solar panel voltage range is between 17-21V
Battery Power
For modules with a lithium-ion battery, please note that the
operating temperature is 0 ~ 60 °C (32~140 °F). For safety
reasons, when the temperature is in the range of 45 ~ 60 °C
(113 ~ 140 °F), the battery can only be recharged to 20%.
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service:
http://support.advantech.com/
This startup manual is for WISE-4671 Series.
Part No. 2043467102
Printed in Taiwan
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
Packaging List
• 1 x WISE-4671 Wireless Module
• 1 x Waterproof Antenna
• 1 x Mounting Bracket
• 1 x WISE-4671 Startup Manual
• 1 x China RoHS Declaration
Note:
Selected I/O Module to be paired with WISE-4671:
• WISE-S614 4AI/4DI with M12 Connectors
• WISE-S614T 4AI/4DI with Terminal Block
• WISE-S615 4RTD with M12 Connectors
• WISE-S617 2AI/2DI/1DO/1RS-485 with M12 Connectors
• WISE-S617T 2AI/2DI/1DO/1RS-485 with Terminal Block
• WISE-S672 6DI/1RS-485/1RS-485 or RS-232 with M12
Connectors
.
DC
Quick Start for WISE-4671 Series
1. Download and install the USB driver.
2. Download and install WISE Studio from https://sup-
port.advantech.com/support/DownloadSRDetail_New.
aspx?SR_ID=1-1MJSJKX&Doc_Source=Download.
3. To power the module, connect a DC power source to
the +Vs and -Vs pins. The device can also be powered
by internal recharageable battery by turning the battery
switch on the side of the device.
4. Connect the module to your computer via the micro-
USB port.
5. Open WISE Studio and click Go To Configuration.
Edition 3
October 2020
One of the below I/O module should be selected
and ordered respectively to be paired with
WISE-4671.
WISE-4671 Startup Manual 1