Advantech WISE-4671 User Manual page 60

Hide thumbs Also See for WISE-4671:

Table of Contents

Power output with Analog Input configuration page: visit I/O Status > COM1 > Mod-

bus/RTU Configuration > Rule Settings > Power Output

Note!

Please make sure your hardware connection and the selection on power

output are both correct.

Delay Time setting: Power Output Delay Time setting makes sure the sensor is

ready before the COM1 runs. Default setting on Power Output Delay Time is 1 sec-

ond, which means the COM1 will run after 1 second delay time from power output

pin.

WISE-4671 User Manual

Table of Contents