Table of Contents
Advertisement
1. General Information
These instructions should be read carefully and retained for further reference
and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the PIR
light controller is switched off and the circuit supply fuses are removed
or the circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used for
the installation of this PIR light controller and install in accordance
with the current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this PIR light controller
is fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.
1
Advertisement
Table of Contents
