Connection For Measuring Element - ABB TTF350 Operating Instructions Manual

Field mounted temperature transmitters

Hide thumbs Also See for TTF350:

Table of Contents

Electrical connection

5.3

Connection for measuring element

Important

The model of the sensor connecting cable must correspond to the sensor model and

configuration of the transmitter.

When connecting the transmitter and measuring inset (sensor) make sure for thermocouple

sensors that the material of the sensor connecting cable corresponds to the thermocouple

model.

1. Look for the connection type for the selected measuring element in the connection diagrams.

2. Release the clamping screws for terminals 1 to 6 using the proper screwdriver. Make sure

that the screws do not fall out.

3. Insert the wires for the measuring element and sensor cable connection under the open

terminals and carefully tighten the clamping screws for the connections.

TTF350

OI/TTF350-EN

Table of Contents