ABB TTF350 Operating Instructions Manual page 37

Field mounted temperature transmitters

Hide thumbs Also See for TTF350:

Table of Contents

Calling up the menu

Fig. 24

1 Entering the menu

1. First, the transmitter voltage supply must be switched on. The "ABB connecting ..." display

appears after a few seconds. The "Primary VAL" value is subsequently displayed.

2. A symbol for calling up the menu is located in the LCD display above the

pressing the

is displayed.

Selecting a menu item/parameter

•

The desired submenu must be selected if the menu contains submenus.

•

You can only then select a parameter when the corresponding submenu contains

configurable parameters, e.g., "Sensor Type".

Configuring a parameter value

1. If a parameter in a submenu is selected, the current configurable parameter value is

displayed.

2. By pressing the

value to be set are displayed. The currently configured parameter value is highlighted.

Using the "HART tag" example, the alphanumeric operation is also possible. The character

position of the tag no. is determined with the

selected from the character set with the

Fig. 25

OI/TTF350-EN

button, the configuration menu is called up. The "Config Device" main menu

"Edit" button, either all configurable parameter values or a numerical

TTF350

button. The corresponding character can be

and

buttons.

Configuration

button. By

Table of Contents