Integrated Peripherals Setup Menu - DTK PAM-0067V User Manual

Chapter 4
4.7

INTEGRATED PERIPHERALS SETUP MENU

The Integrated Peripherals setup option is need to change the values of the I/O chipset
registers for I/O functions.
OnChip IDE First Channel
OnChip IDE Second Channel
IDE Prefetch Mode
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
Init Display First
POWER ON Function
KBC input clock
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
A short description of the screen items follows:
OnChip IDE First Channel/OnChip IDE Second Channel: These items are used to enable or
disable the onboard IDE Channel.
IDE Prefetch Mode: Choose Enabled to set the onboard IDE controller to access the IDE device
with faster Prefetch Mode.
IDE HDD Block Mode: This allows your hard disk controller to use the fast block mode to
transfer data to your hard disk drive.
42
ROM PCI/ISA BIOS (2A5LEG3B)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled UART Mode Select
: Enabled
: Enabled Onboard Parallel Port
: Enabled Parallel Port Mode
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: PCI Slot
: Button Only
: 8MHz
ESC: Quit
: Enabled
F1: Help
: 3F8/IRQ4
F5: Old Values (Shift)F2: Color
: 2F8/IRQ3
F6: Load BIOS Defaults
F7: Load Setup Defaults
Fig. 26
: Normal
: 378/IRQ7
: SPP
↑ ↓ → ←: Select Item
PU/PD/+/-: Modify