DTK PAM-0067V User Manual page 41

High performance pentium pci mainboard
Table of Contents

Advertisement

Award BIOS Setup Guide
Boot Sequence: With the default setting the BIOS first attempts to boot from drive A: and then, if
unsuccessful, from hard disk C:. User can select other boot up sequence. Available sequences are
"A,C,SCSI", "C,A,SCSI", "C,CDROM,A", "CDROM,C,A", "D,A,SCSI", "E,A,SCSI',
"F,A,SCSI", "SCSI,A,C", "SCSI,C,A", "C Only", "LS/ZIP,C".
Swap Floppy Drive: Choose Enabled or Disabled. This option lets end users to change the Drive
A: or B: to others.
Boot Up Floppy Seek: Choose Enabled or Disabled. Disabled provides a fast boot and reduces
the possibility of damage to the heads.
Boot Up NumLock Status: Choose On or Off. On puts numeric keypad in Num Lock mode at
boot-up. Off puts numeric keypad in arrow key mode at boot-up.
Boot Up System Speed: Choose High or Low. Set the CPU timing at Boot Up, the default is
high.
Gate A20 Option: Choose Fast (chipset handled) or Normal (keyboard handled). The gate A20 is
a device used to address memory above 1Mbytes. Initially, the gate A20 was handled via a pin on
the keyboard. Today, while keyboards still provide this support, it is more common, and much
faster, for the system chipset to provide support for gate A20.
Memory Parity/ECC Check: Choose Enabled or Disabled. If memory modules with Parity of
ECC is installed.
Typematic Rate Setting: Choose Enabled or Disabled. Enabled will determines the typematic
rate defined by following two options.
Typematic Rate (Chars/Sec): The number selected 6,8,10... indicates how fast the number of
characters can response in one second.
Typematic Delay (Msec): The number selected indicates the time period between two identical
keys appear.
Security Option: Choose Setup or System. If system is selected, the password should be set.
PCI/VGA Palette Snoop: Select Disabled or Enabled.
If Enabled the MPEG Card can
synchronised with PCI/VGA.
OS Select For DRAM > 64MB: Select Disabled or Enabled. If the system memory is larger than
64MB and running OS/2, please enable this item. However, if it use other operating system,
please disable this feature. Furthermore, if the system memory is less than 64MB, the BIOS will
ignore this function.
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pam-0067v e0

Table of Contents