Integrated Peripherals Setup Menu - DTK PAM-0052V User Manual

Chapter 4
4.7

INTEGRATED PERIPHERALS SETUP MENU

The Integrated Peripherals setup option is need to change the values of the I/O chipset
registers for I/O functions.
OnChip IDE First Channel
OnChip IDE Second Channel
IDE Prefetch Mode
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
Init Display First
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART2 Mode
A short description of the screen items follows:
OnChip IDE First Channel/OnChip IDE Second Channel: These items are used to enable or
disable the onboard IDE Channel.
IDE Prefetch Mode: Choose Enabled to set the onboard IDE controller to access the IDE device
with faster Prefetch Mode.
IDE HDD Block Mode: This allows your hard disk controller to use the fast block mode to
transfer data to your hard disk drive.
32
ROM PCI/ISA BIOS (2A5LEG3B)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled Onboard Parallel Port
: Enabled Parallel Port Mode
: Enabled
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: PCI Slot
: Enabled
ESC: Quit
: 3F8/IRQ4
F1: Help
: 2F8/IRQ3
F5: Old Values (Shift)F2: Color
: Standard
F6: Load BIOS Defaults
F7: Load Setup Defaults
Fig. 21
: 378/IRQ7
: SPP
↑ ↓ → ←: Select Item
PU/PD/+/-: Modify